149、measures for unloading and placement of lng vacuum storage tank -k8凯发

 149、measures for unloading and placement of lng vacuum storage tank -k8凯发

welcome to"suzhou doer gas & chemical equipment co., ltd" website!

hotline: 86 512-81666096
0512-66182570

hotline

86 512-81666096
forum

now:home > news > forum

149、measures for unloading and placement of lng vacuum storage tank - doer equipment

classification:forum publishtime:2020-01-18 14:07:09

measures for unloading and placement of lng vacuum storage tank


① . fasten the top lifting lug and leg lifting lug with ropes according to the lifting instruction drawing (the horizontal tank adopts the top lifting lug of the storage tank. if there is no lifting lug, the bottom hanging can be used outside the saddle).


② . remove the chain, rope or support that secures the tank to the truck deck.


③ . raise the tank a few inches and check that there is no connection between the tank and the trailer.


④ . remove the storage tank from the trailer and place it on the floor mat, or if the floor mat is under construction, place the storage tank in the designated storage area.


place precautions


if the storage tank (especially the larger storage tank) will be installed at the customer's location, the following factors shall be considered before installation:


the first consideration is that the location of the storage tank shall be dense, easy to operate and close to the liquid transmission point.


solid soil conditions shall be provided to prevent equipment from being damaged during installation and storage, and the foundation of the storage place must be kept away from the drainage ditch.


if the storage tank is placed outdoors, the location shall be such that the storage tank and related equipment (if any) will not be exposed to or in the environment of damaged power supply flammable liquid pipeline or flammable gas pipeline.



home product case
网站地图