hotline
86 512-81666096152、about tank filling system - doer equipment
classification:industry publishtime:2020-07-29 08:52:12
about tank filling system
discharge pipeline of storage tank:
the liquid in the storage tank is discharged through the liquid discharge outlet at the bottom. the discharge pipeline is provided with a low temperature stop valve at the root, which is divided into two paths after leaving the root stop valve. a low temperature stop valve at the root is respectively provided to connect the inlets of two pumps.
tanker pipeline:
the liquid in the storage tank is discharged through the dn40 discharge port at the bottom. the discharge pipeline is equipped with a double low temperature stop valve and a quick filling joint for tank car connection,
the liquid discharge pipeline is also provided with a gas seal structure inside the equipment, which is led out from the bottom plate of the inner groove, so as to ensure that the liquid can be discharged completely; in order to facilitate the precooling and start-up of the pump, an anti swirl structure is set at the discharge port to avoid the cavitation of the pump.
prev: 151、on the device of liquid inlet system of storage tank - doer equipment
next: 180、function and overview of air heated carburetor - doer equipment
news
- 205、lng operating procedures - doer equipment [2022-11-15]
- 205. tank classification and characteristics - doer… [2022-11-15]
- 204. brief introduction to tank development - doer … [2022-10-31]
- 204、lng vacuum cryogenic liquid storage tank - doe… [2022-10-31]
- 203、precautions for precooling of natural gas stor… [2022-10-28]
- 203、preparation before pressure regulation of lng … [2022-10-24]
- 3,successful test run of cangzhou ethylene storage… [2019-09-02]
- 2,advantages of suzhou doer large cryogenic tank … [2019-08-30]
- 1,congratulations on the success of one-time liqui… [2019-08-26]